EZCast LAN Quick Start Guide
产品安装示意图
1. 请用配件中的USB线,小头端连接EZCast盒子, 大头端连接电视机的USB口或者连接USB电源适配器.但并不是所有的电视机USB口提供的电源符合标准,推荐连接USB电源适配器.
2. 请使用HDMI线,连接EZCast盒子的HDMI接口与电视机上的HDMI接口,并把电视的显示源切换到所连接的HDMI口.
3. 如果需要用到有线网络, 请把家庭路由器的网线连接到EZCast盒子的网口
4. 连接成功后,电视会显示EZCast的欢迎界面并有开机音乐.
5. 请下载EZCast盒子搭配的软件,各个平台请到这里下载.
6. 下载安装完成,请先把手机/平板的无线网络连接到电视上方显示的EZCastLan-xxxxx网络,然后运行EZCast软件,即可使用各个功能.
Hardware Installation:
1.Please plug power adapter’s USB connector into EZCast LAN box micro USB port.
2.Connect HDMI cable between EZCast LAN box and your TV/Projector's HDMI ports, and switch the TV/Projector’s source to corresponding HDMI port.
3.If Ethernet router is available, please use Ethernet cable to hook up router and EZCast Box.
4.You will see EZCast main menu on the screen and hear the welcome tone.
5.Please download EZCast app for different platforms (Windows/Mac/iOS/Android/WindowsPhone) to enjoy WiFi display!
6. Connect your smart devices to EZCast LAN box SSID (password is shown on screen) and then launch EZCast app to enjoy it.
Watch setup videos
Download full user manual
Download Quick Start Guide
Subscribe for
more demo videos
